Basic Info.
Type
Remote Pressure Transmitter
Structure Type
Diffused Silicon Pressure Transmitter
Pressure range
0.001MPa~35MPa
Product Description
1, measuring the sensor shaft flange and the belt pulley, the belt pulley and the shaft is concentric.
2, will install the screw fixation, the sensor and the axis tolerance is + 0.02
3, will be installed on the belt pulley belt. Rotate the belt wheel 360 degrees to see the change of the sensor, the sensor
Up and down to beat 0.25Nm for qualified.
4, with a mechanical device fulcrum fixed sensor shell, do not rotate the sensor case with the belt pulley.
5, the sensor cable to avoid the mechanical power line wiring, interference when doing anti interference processing. Earth, shielded wire, or a strong anti-interference circuit.
6, the installation of the substrate surface should have a certain strength, can ensure the stability of the installation, avoid excessive vibration, otherwise it may cause the measurement data is not stable, affect the accuracy of the measurement.
7, standard sensor using the level of installation, the sensor can not bear the axial force, bending moment,
Otherwise it will cause damage to the sensor.
8, the sensor vertical or other angle of the installation, please put forward the installation requirements before ordering, choose
Optional sensor for installation requirements.
Feature
Wide range
Protection :IP65;
Scene adjustable
Various output signal
CE certification
Marking :ExiaIICT6;
Application
Compatible with 316LSS,noncorrosive gases & liquids
Petroleum industry, chemical industry, metallurgy industry, electric power, hydrology etc.
Measurement Range | -0.005...0~0.01Nm...~100KNm |
Proof pressure1 | ≤1.5X rated pressure or 110MPa which ever is less |
Pressure type | Gauge, absolute ,sealed gauge |
Accuracy | ±0.25%(typical) ±0.5%(Max.) |
Long term stability | ±0.1%F.S/year(typical) ±0.2%F.S/year(Max.) |
Temperature Error- Zero | ±0.03%F.S/ºc ±0.02%F.S/ºC |
Temperature Error -Span | ±0.03%F.S/ºC ±0.02%F.S/ºC |
Media TemperatureRange | -20ºC~150ºC |
SurroundingTemperatureRange | -40ºC~80ºC |
Power supply | 24VDC |
Output signal | 4~20mA 0/1~5/10 0-±5VDC |
Pressure port | 18 38 mm |
Housing material | 1Cr18Ni9Ti stainless steel |
Diaphragm material | 304 |
O-ring | Fluororubber |
Cable | polyethylene |
Insulation resistance | 100MΩ,100VDC |
Protection | IP65 |
Address:
Room 103, Building 5, No. 2 Qingma Road, Maqun Technology Park, Qixia District, Nanjing, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics
Management System Certification:
ISO 9001
Company Introduction:
Located in NanJing, RanKong Advanced Sensor Technology, Inc. is a leading China manufacturer and supplier of advanced Load Cells, Force Sensors, Torque Sensors, Pressure Sensors, Signal Conditioners, Digital Displays and Portable Sensor Verification / Calibration Systems utilizing Strain Gauge and thin film technology. Torque Sensors, Pressure Sensors, Instruments and Accessories. RanKong has presented Sensor Solutions to global industries such as the Manufacturing, Automotive, Medical, and Aerospace. RanKong has demonstrated steady growth and built a solid reputation as a "Sensor Solution Company" in China and overseas markets.